by At present, in the development process of China’s construction industry, in order to comply with the development of the market, some new construction engineering situations gradually appear in the market.
Among them, precast construction engineering has the characteristics of low cost and high construction efficiency, so it has attracted great attention of the society.
More and more construction enterprises began to change the traditional construction mode, and began to vigorously apply the precast building.
The core of precast building engineering is the design and installation of precast components, which is an important factor affecting the whole precast building industry.
At the same time, the precast building project also has the characteristics of environmental protection, fast construction progress and high quality.
During the construction of precast houses, the adoption of BIM Technology can strengthen the reasonable control of the whole project construction site, the accurate calculation of quantities and the comprehensive analysis of collision detection experiment.
Combined with the specific characteristics of assembly engineering, BIM Technology can ensure that the whole project highlights its own advantages and realize the innovative development of the construction industry.
1bspecific application of IM technology in the assembly system ＾ 1.1 application in the engineering design stage ＾ combined with relevant data information, the management and control of the whole assembly engineering design stage can strengthen the economic benefit level of the whole project.
However, in the actual application process, the staff do not pay enough attention to the control of the design stage, resulting in many unreasonable situations in the design scheme, resulting in the waste of construction resources and unreasonable construction procedures, and finally increase the project cost.
Modern construction project management needs to calculate the project cost in the design stage in combination with the construction requirements of the project to ensure the accuracy and comprehensiveness of the whole data.
Then submit the data for approval to improve the cost management level of the whole project.
The application of modern BIM Technology in engineering design can ensure the rationalization of the whole design scheme.
1.2 using BIM Technology to determine the management scheme # for the construction process of precast building engineering is very complex, only reasonable professional technology and management methods can ensure the smooth construction of the project.
Therefore, the management personnel of the project need to formulate a perfect management scheme, strengthen the identification of risk factors in construction, and take corresponding protective measures and solutions.
However, due to the influence of some traditional management methods in China’s construction projects, the management scheme will be missing.
Only by adopting reasonable BIM Technology can we ensure the comprehensive construction of the project.
For the improvement of water conservancy project management, it is necessary to ensure that every construction detail in the project should be accurately judged and analyzed.
1.3 application of three-dimensional visual technical disclosure before construction of building engineering, BIM Technology is used to disclose the views of complex positions in the drawings.
Through the disclosure, the whole construction site can be more intuitive, so as to facilitate the later construction guidance.
The specific three-dimensional visual disclosure technology also has the following advantages in the application process: first, the three-dimensional visual disclosure technology will increase the contrast of the whole project and help designers find the problems existing in the design scheme.
Secondly, the application of this technology can also help the owner understand the actual situation between the building structures of the whole project, so as to master the construction progress and quality of the construction project, which is conducive to the owner to put forward targeted improvement suggestions.
1.4 application of BIM Technology in the construction of precast engineering ’ in the construction of construction engineering, BIM Technology is used to sort, analyze and save information, which can correctly grasp the specific construction situation of the whole project.
Then reasonably allocate the mechanical equipment and technicians used in the construction to realize the comprehensive planning and management of the whole project.
Then formulate the specific construction plan for the next step.
Compared with the traditional engineering structure, precast building engineering is more complex and changeable.
The construction unit should use BIM Technology in engineering construction management to meet the high requirements of precast building engineering construction.
In addition, it can also avoid some construction chaos and ensure the safe, orderly and smooth implementation of the whole project.
The application of BIM Technology can also accurately detect the specific links of each project construction.
Once emergency and safety hazards are found, effective emergency treatment schemes can be taken in time to avoid the expansion of risks and reduce adverse losses to the enterprise.
Precast construction engineering is an important trend in the development of China’s modern construction industry.
It has the characteristics of high efficiency, convenience, low cost and fast construction.
It can effectively solve the influence of some adverse factors in traditional construction engineering and improve the overall construction level.
Reasonable use of BIM Technology to process the data, and then establish a real three-dimensional model, strengthen the comparative analysis between the design and the actual project, standardize the production process of the whole component, simplify many problems in the assembly construction and improve the overall work efficiency.
In addition, the application of BIM Technology can also improve the overall construction volume of precast buildings, reduce the risks and problems encountered in construction, and strengthen the overall control of the whole project construction.
BIM Technology is a very important technical means in the future development of precast building engineering in China.
Therefore, it is necessary to master the application characteristics and advantages of BIM Technology, fully apply it to precast building engineering, give full play to the characteristics of this construction structure, and promote the healthy and stable development of China’s construction industry.
In the development of precast building engineering in China, the application of BIM Technology can improve the information construction of the whole project..
