by Steel structure alliance creates the first communication platform in the steel structure industry.
8.
Roof daylighting plate 8-1 and cv-203-406 plate Description: ■ this daylighting plate type is used with hv-203kl-406 plate.
8-2.
Description of cv-380-760 board: ■ the daylighting board type is used with hv-380sf-760 board.
8-3.
Description of cv-475-475 board: ■ the daylighting board type is used with hv-475sf-475 board.
8-4.
Description of cv-197-788 board: ■ this daylighting board type is used with hv-197td-788 board.
8-5.
Description of cv-205-820 board: ■ the daylighting board type is used with hv-205td-820 board.
8-6.
Description of cv-225-900 board: ■ the daylighting board type is used with hv-225td-900 board.
8-7.
Connection node figure 8-7-1, cv-475-475 plate connection node 8-7-2, description of other plate connection nodes: ■ the above figure is the connection node figure of cv-203-406 plate; The self tapping screw penetrates the daylighting plate (and profiled steel plate) and is connected with the purlin.
■ except cv-475-475, other daylighting panels shall be treated according to the above figure.
9.
Floor support plate 9-1, hg-344-688 plate 9-2, hg-240-720 plate 9-3, connection diagram connection node Description: ■ hg-240-720 plate connection refers to hg-344-688 floor support plate connection diagram.
■ the shear stud and frame beam are welded with special tools.
10.
Gutter 10-1, color plate outer gutter wtg-1 type, wtg-2 type 10-2, steel plate inner gutter 10-2-1, section Description: ■ the gutter is made of steel plate; According to the material and coating of steel plate, it can be divided into ordinary steel plate gutter, galvanized steel plate gutter and stainless steel plate gutter.
11.
Ventilator 11-1.
Description of ridge natural ventilator: ■ the ventilator is divided into four specifications: 1m, 1.5m, 2M and 2.5m according to the throat width WM, and the length is determined according to the required air exchange rate and the length of the house.
■ the top profiled steel plate can be replaced by daylighting plate as required.
■ one frame is set every 1.5m, which is connected with roof purlin or special beam through lower connecting hole.
11-2.
Point ventilator Φ 500 unpowered ventilator ■ other models of ventilator can be provided, but sufficient supply time is required.
Note: ■ the waterproof treatment between ventilator and roof profiled steel plate can also be treated with detai cover sheet.
11-2-2.
Description of powered ventilator: ■ the powered fan rotates the turbine driven by the motor to complete the ventilation.
Note: ■ due to the heavy weight of the powered fan, the supporting keel must be set at the lower part to bear the fan load.
12.
Door 12-1.
Description of color plate sliding door: ■ color plate sliding door can be made into single-layer color plate, double-layer color plate and sandwich plate as required.
12-2.
Description of color plate double door: ■ color plate double door can be made into single-layer color plate, double-layer color plate and sandwich plate as required.
12-3.
Description of hollow metal doors: ■ hollow metal doors are used in offices and other rooms in civil buildings and industrial buildings.
13.
Window Description: ■ on the elevation, you can choose independent window or full-length strip window.
■ window sashes can be fixed window sashes and sliding window sashes.
■ aluminum profile or plastic 14, flashing plate and trim plate can be selected as the profile.
Description: ■ W1 has different values due to different profiled steel plates of the inner wall; W2 takes different values according to the difference between brick wall and wall beam.
14-2.
Description of the joint between brick wall and profiled steel plate wall: ■ W1 and W2 dimensions change according to the profiled steel plate type.
14-3.
Description at the wall top: ■ the W value varies according to the wall beam and profiled steel plate.
14-4.
Junction of gable and roof 14-4-1.
Description of wall protruding from roof: ■ W1 and W2 dimensions vary according to different profiled steel plates on the outer layer of the roof.
14-4-2.
Description that the wall is flat on the roof: ■ the dimensions of W1 and W2 vary according to the different profiled steel plates on the outer layer of the roof.
14-5.
Description of roof ridge: ■ the dimensions of W1 and W2 vary according to different roof profiled steel plates.
14-6.
Wall opening Description: ■ the dimensions of W1, W2, W3, W4 and W5 vary according to the different wall profiled steel plates and wall beams.
Please pay attention to the official account of steel structure alliance..
