Pay attention to us , share more knowledge about steel structure processing , I.
resource preparation of steel component processing instruments and processing equipment (1) preparation of equipment and instruments , the production of steel structure is customized according to the requirements of the project contract, and the production organization is carried out according to the product variety, characteristics, batch, process flow, progress and other requirements.
Therefore, before the production of steel structure, it is necessary to prepare the production equipment and arrange the production according to the flow sequence, Minimize the transportation volume of components and avoid reverse flow operation.
The production of steel structure is an industrialized flow process, with a high degree of use of mechanical equipment, involving a wide range of instrument types; The normal operation of instruments and meters directly affects the smooth progress of production.
Before mass production, it is necessary to overhaul and debug the equipment, instruments and meters to be put into operation to ensure that they are in normal working state and meet the requirements of product processing accuracy.
For example, the ammeter and voltmeter of welding equipment show the current and voltage used by welders during welding operation, which is a necessary condition affecting the welding quality of welds; Therefore, the preparation of equipment and instruments is an essential tooling content before steel structure production.
(2) Preparation of tools and fixtures} steel structure components are generally complex, and the assembly and assembly processes in production need to be completed on the general or special tooling jig frame.
The processing methods of different components are different, and the required tooling and fixtures are also different.
Before component production, various tooling and fixtures required for processing shall be prepared according to the characteristics of components to be processed and the requirements of production process documents.
(3) Inspection and measuring instruments preparation inspection and measuring instruments are mainly used for measurement, product inspection and other auxiliary work during steel structure production and operation.
It is the basis for the scientific production of steel structure products according to the design requirements.
It is widely used in the actual production and basically covers all the processing procedures of steel structure production.
The inspection and measuring instruments commonly used in production include measuring tools, such as tape measure, steel ruler, angle ruler and vernier caliper; Line drawing tools, such as all kinds of pens, chalk balls and compasses; Inspection and measuring instruments such as line hammer, level ruler and level gauge, level gauge, laser theodolite, weld gauge, ultrasonic flaw detector, etc.
These inspection and measuring instruments shall be intact and within the validity period.
Source: Internet..