by Click the blue words above to pay attention to us ~ in recent years, the assembly and decoration of the domestic medical and nursing industry has begun to enter the stage of rapid development.
After understanding the foreign advanced processes, the hospital assembly and decoration process has the characteristics of systematization of design, component industrialization and Installation and other characteristics.
Compared with the traditional technology, medical and nursing assembly decoration has the following characteristics: meeting the needs of sustainable development of the hospital; Materials are durable, environmentally friendly and recyclable; Low construction cost, short construction period and little impact on the operation of the organization; Simple process, centralized control and quality assurance; Centralized after-sales service.
Advantages of cast interior decoration in the medical and nursing industry specifically, the advantages of applying the cast interior decoration technology to the medical and nursing industry are mainly reflected in the following three aspects: 01 the main construction method of the cast interior decoration technology is dry construction, and the decoration parts are made in the factory, which reduces the noise The generation of dust and construction waste makes it possible to construct in batches, so as to reduce the impact on the use function of the medical and nursing industry; Since the medical care unit is mainly composed of repeated standardized units, the factory can prefabricate a large number of standard components in advance.
The cast interior decoration construction method is faster and more efficient than the traditional method, which can improve workers’ labor productivity, save labor and management costs, greatly shorten the transformation cycle, and have obvious comprehensive benefits.
03 the industrialized built-in components have certain interchangeability and versatility, which is easy to maintain, manage, repair and replace, reducing the difficulty of later operation and maintenance.
At the same time, it creates a partition wall that may be easy to disassemble and replace for the renewal and change of built-in components, which can facilitate the change of internal space in the medical and nursing industry.
Applied to the interior decoration system of the medical and nursing industry, the focus of the assembled interior decoration of the medical and nursing industry is to separate the main structure from the interior parts, and make the different interfaces of the assembled interior decoration into a complete set of industrialized interior decoration system.
According to the decoration interface, the whole system can be divided into interface decoration system, partition system, ceiling system, ground system, storage system, toilet system, equipment pipeline system, etc.
01 according to the medical functional requirements, carry out the fine design of interior decoration from two aspects of functional part design and interface design, and formulate the technical scheme of assembled interior decoration.
The function of indoor functional component design is mainly to integrate the customized component system into the indoor space overall design stage according to the functional requirements and current conditions of the medical care unit, select the type according to the characteristics, quality and size of each component, and improve the integration of the component and the main building structure of the medical care unit.
02 wall space includes partition system Wall finishing system partition wall system adopts light steel keel internal partition wall and applies assembly technology to quickly separate indoor space.
On the premise of not involving load-bearing structure, it can be quickly built, delivered and used to establish support carrier for wall finishing.
Wall finishing system dry quick installation wall surface is in leveling wall Light steel keel partition wall or uneven structural wall and other wall base layers adopt dry-type on-site combined installation of integrated wall surface, which can carry out different finishing composite treatment on the integrated decorative wall panel according to the use space requirements to express various textures and textures 03 the top space generally adopts integrated ceiling system, and the ceiling finishing system generally adopts calcium silicate board, gypsum board The top space of aluminum gusset plate ceiling system is the most important wiring space in the interface space system.
The top space system is combined with the component system installed on or connected with the top, electrical system, lighting system, ventilation system and air conditioning system.
The pipeline position of each system shall be properly handled, To avoid mutual collision and interference 04 the ground space generally adopts dry fast installation.
The ground is composed of dry floor heating + ground finishing materials.
The components that can be used for medical care units are: dry floor heating + flexible decoration materials (PVC floor, linseed oil floor, ground film, etc.) the indoor heating system gives priority to the low-temperature hot water floor radiant heating system constructed by dry construction method.
Its installation and construction can be carried out after the civil construction is completed.
It does not need to be buried in the concrete base.
Compared with radiator heating, its comfort is higher, which solves the floor load existing in the traditional wet floor heating system products and its construction technology The problems of large load, complex construction process and inability to replace the damaged pipeline have the advantages of short construction period, small floor load The advantages of easy maintenance and transformation, the upgrading of medical technology, the replacement of medical equipment, the change of medical treatment mode and the improvement of humanized demand are promoting the medical and nursing industry to continuously improve the sense of environmental experience.
The traditional decoration experience can not meet the development needs of the medical and nursing industry tomorrow.
The assembled decoration mode combines aldehyde free, antibacterial Bacteriostasis, green environmental protection and other decoration factors can maximize the decoration needs of the medical and nursing industry.
Scientific and technological assembly can open a better life.
Contact number: 400-856-0580 website: www.sunaite.com com。.
