by Assembly decoration is one of the development directions of interior decoration design in the future.
With many advantages, the indoor precast quick installation decorative board has gradually become the most popular wall decoration material in the precast decoration.
At the same time, it is also favored by designers and owners! So, today, let’s talk about the indoor precast quick installation decorative board from the following aspects! I.
what is the indoor assembled quick installation decorative board? 2、 Types and comparison of indoor precast quick installation decorative board III.
construction technology of indoor precast quick installation decorative board I.
what is indoor precast quick installation decorative board? 1.
Definition of indoor precast quick installation decorative board indoor precast quick installation decorative board is a decorative wall product precast in the factory and installed on site by decorative surface layer, base material, functional modules and their accessories.
The indoor assembled quick installation decorative board refers to the decorative surface layer in the indoor integrated wall.
2.
The characteristics a, forms, colors and texture styles of the indoor assembled quick loading decorative board are various, including stone grain, wood grain, cloth grain and a variety of high simulation patterns, and can even be customized freely according to the design requirements.
B.
non polluting raw materials are selected for green environmental protection plates, with clean taste and environmental protection.
Formaldehyde emission is not detected, and harmful heavy metals are not detected.
Brand new environmental protection materials are used, which are 100% recyclable and in line with the national executive standard GB / t24137-2009.
Because the personalized design method combining standard module and functional module is adopted, there is basically no decoration waste and secondary processing dust during on-site assembly.
C.
excellent performance.
Generally, after normal installation, it can ensure the service life of more than 20 years.
Its material performance is stable, with strong wear resistance, compression resistance, waterproof and fire resistance.
It is very easy to maintain in the future.
D.
wide applicability, from home decoration to tooling, flexible and applicable to different places.
At present, it is widely used in home decoration wall decoration, and also applicable to tooling wall decoration of public buildings such as hotels, schools, hospitals, office buildings, shopping malls and so on.
E.
convenient construction.
The construction is very convenient without too much preliminary preparation.
The flat blank wall can be constructed.
The modular assembly method is adopted.
As long as the size and specification are determined in advance, it can be installed like an efficient puzzle.
F.
cost saving directly bypasses the complex and long traditional processes and labor costs, and relatively saves a lot in terms of time cost and economic cost.
II.
Classification and comparison of indoor precast fast-moving decorative boards.
According to different plate materials, indoor precast fast-moving decorative boards can be divided into two categories: Bridge orifice board and Jingwei · Zhen board.
1.
Bridge orifice plate a.
the bridge orifice plate is usually made of natural stone powder, high-quality PVC, polymer resin and other raw materials, extruded at high temperature and formed by nano polymerization.
B.
advantages: it has rich colors and textures such as stone grain, wood grain and wallpaper.
The buckle process is more accurate and the degree of fit is higher.
It solves the problems of large flat seam assembly shrinkage, easy corrugated seam and serious height difference of other plates.
It is flat and seamless.
At the same time, due to the relatively simple raw materials and process, the cost is lower than other quick installation wallboards, meeting the decoration budget needs of various customers.
C.
common parameters common parameters of bridge orifice plate are as follows: the width is usually 550mm and 600mm, the length is usually 2800mm and 3500mm, and the size can be customized according to the design requirements.
The plate thickness is usually 7mm, 8.5mm and 9mm.
2.
Jingwei · Zhen board A.
Jingwei · Zhen board is usually made of nano polymer materials, original bamboo, wood fiber, stone crystal powder and other raw materials, which are pressed and compounded at high temperature.
B.
advantages: clean taste and environmental protection.
It has the functions of fire retardant, moisture-proof, mildew proof and moth proof.
It is a high-end environmental protection decorative material that can breathe, formaldehyde free and pollution-free.
The product base material is composed of high-density and multi cavity hollow bridge hole structure, so that it has good sound insulation, noise reduction and thermal insulation performance.
It adopts new environmental protection materials and 100% recyclable high-quality quality.
The whole series of products meet the national executive standard GB / t24137-2009.
C.
common parameters: the common parameters of Jingwei Zhen wood board are as follows: the width is 600mm, and the length is usually 2800mm and 3500mm.
At the same time, the size can be customized according to the design requirements, and the plate thickness is usually 8.5mm and 9mm.
III.
construction process of indoor precast quick installation decorative panels # the construction process of the above two types of indoor precast quick installation decorative panels is basically the same, and the specific installation process is as follows: preliminary preparation → construction preparation → grid snapping → installation of quick installation wall panels → acceptance.
1.
Preliminary preparation A.
measure the wall installation area according to the design scheme, and select the appropriate product size according to the actual situation on site.
b.
According to the design style and the shape and size of each space, determine the plate type and dosage of quick installation wallboard.
2.
Construction preparation A.
clean up the construction waste on site and create a good and safe construction environment.
If there is dust and dirt on the wall, it shall be cleaned.
B.
prepare the required plates, accessories and installation tools, and check whether the plates and accessories are complete and free of defects.
c.
Check the flatness and smoothness of the wall.
If it is uneven locally, it must be filled.
d.
If necessary, the foundation shall be laid by carpentry in case of modeling wall.
3.
Snap the line according to the design and size of the overall wall, determine the starting position and joint connection position of the plate joint, and snap the horizontal line, vertical line and other plate positioning lines respectively.
4.
Install the quick installation wallboard A.
clamp the metal buckle in the wallboard groove, make it vertical and balanced with infrared ray, and then fix the buckle on the wall with screws, or clamp the metal fixed i-strip into the wallboard for fixed installation..
