by ██ 13838286043 wechat same number ██ manufacturer of reinforcement sleeve connection grouting material | manufacturer of precast building sleeve grouting material ★ source manufacturer of sleeve grouting material for reinforcement connection, with preferential price, complete qualification and quality assurance.
Welcome to inquire! 3-day strength ≥ 60MPa, final strength ≥ 100MPa, high fluidity, early strength, high strength, plastic expansion, easy construction, mainly used for reinforcement sleeve link, secondary grouting of large equipment, precast frame column / shear wall, precast residential foundation link, and delivery from six major factories in China! Or just use SCI polishing powder, depending on the wear of stone.
Then, after polishing the stone, wait 12-24 hours, let the stone dry, and then protect it with protective agent.
Protective agents can avoid most staining.
However, once the dyeing occurs, you don’t need protective agent.
Just use SCI dirt absorbing powder to dye, clean it with floor cleaner or table cleaner, let it dry, and if the dyeing is completely cleaned, protect it with protective agent again.
1、 Product features: good fluidity: the initial fluidity is greater than 300mm Plastic expansion: the slurry starts to expand after pre mixing to fully compensate the plastic shrinkage caused by water evaporation.
Post expansion: composite expansion mechanism, post expansion under closed conditions (expansion after hardening) to ensure firm connection between reinforcement and sleeve.
Manufacturer of reinforcement sleeve connection grouting material | manufacturer of precast building sleeve grouting material..
